InventorCAM 2024 SP2 HF2

SOL-30878 Turning || Geometry on solid || Selection of face doesnt work
SOL-30792 GUI || French | HSR || Translation
SOL-30759 GUI || French || SolidCAM Settings
SOL-30757 GUI || French || 2D milling operations || drilling
SOL-30756 GUI || French || 2D milling
SOL-30738 GUI || French || 5Axes ||Probe
SOL-30737 GUI || French | Hsr || Hsm || English strings
SOL-30730 GUI || French || Ribbon || CoordSys || Target
SOL-30727 GUI || French || Turning || Drilling
SOL-30714 GUI || French GUI icon is wrong
SOL-30712 GUI || French GUI is wrong
SOL-31800 SolidCAM for Operators || External Parts || Issue to open CAM Parts from SC2022 and SC2023 versions
SOL-31792 SolidCAM For Operators will always convert internal parts of previous versions.
SOL-31778 SolidCAM for Operators || Internal Parts || Turning and MillTurn Parts || Parts get uncalculated when opened
SOL-31777 SolidCAM for Operators || Internal Parts || Not getting message when the previous version is not available
SOL-31767 Channel Synchronization || Two issues when adding operation
SOL-31763 Setup Sheet || General || <SCPartTotalTime> is wrong in SC2024D branch
SOL-31736 VMID || Reset to Default is incorrect in Compensation for Chamfer
SOL-31731 2.5D || Chamfer || Compensation || doesn't saved the entered chamfer diameter value
SOL-31686 Machine Setup || Part Page || Detected GUI issues
SOL-31684 General || Inch || Settings || Accuracy errors
SOL-31672 Cimco Editor 2024 || Install || License file for Cimco is missing when it's installed with modify installation
SOL-31660 MillAngel || Brothers ||Problem in Pocket resulting in uncut areas
SOL-31658 Motion Control || Reposition Groupbox || Control is out of place
SOL-31622 ChannelSync || Some operation stay in color red after reset synchronization from a project that just get converted from a previous SC version
SOL-31543 SW 2025 || Refresh Task Pane When Opening Parts
SOL-31504 Prepare simulation data || Mill-turn projects || SolidCAM crashes
SOL-31491 Drilling || strange changes after ‘’Reset all default’’ option
SOL-31482 CoordSys || Editing CS on MAC2 with CoordSys#1 setting will result wrong output
SOL-31464 iMachining || Template || Geometry window is inactive when the template is loaded
SOL-31401 Update SolidCAM installers with CIMCO OEM Suite - version 2024.01.30
SOL-31383 VMC || Can't remove configuration
SOL-31367 Pro 3D HSR || Restrict Lead arc generation when Arc fit is disabled
SOL-31361 ToolKit || Crash || Usage of taper mill in Japanese version crashes the software
SOL-31318 GUI || iMachining || After loading template the UI is disarranged
SOL-31317 Pocket || Area selection no longer works after zero point change
SOL-31315 Toolkit || Problem with colour for toolpaths
SOL-31301 ToolKit || Crash of the ToolKit with specific conditions
SOL-31238 VMID || Crash caused by VMID with weird encoding
SOL-31234 MCO || GUI || Misc. Message is not correctly aligned
SOL-31221 GUI || Language || Czech || GUI problem
SOL-31219 GUI || Language || Dutch || GUI problem
SOL-31205 2D Pocket || With floor rounding - wrong Sequenz Downsteps
SOL-31202 MCO || Wrong value when using Current Loc' and some other function
SOL-31198 General || Slower calculation times with "Show Machining Time"
SOL-31193 Template || iMachining || For multiple facese operation remain uncalculated
SOL-31190 MCO || Setup Loc' will be set to 0 after CAM-Part closing
SOL-31188 Pocket || Option - remove remaining material
SOL-31187 Multiaxis || Levels || Add Tool Orientation
SOL-31180 MCO || TCP Mode not switched to OFF after changing in the VMID to NONE
SOL-31175 Milling || Rotary Finishing || GUI disappears
SOL-31173 Pro 3D HSM || Mirror is not working for User defined and Selected surfaces
SOL-31170 XML - Interface || Export in <Shape/> || OHL as "outside holder length"
SOL-31166 Pro 3D HSM & Turbo 5x || Mirror doesn't work for some boundary types
SOL-31155 Wrong Setup Loc' Position
SOL-31152 MCO || Stock is not detected on BS
SOL-31151 Machine Simulation || Simulation cannot be run from the operations created on the second setup
SOL-31138 Tookit || Drive unit name field become empty after saving and closing toolkit
SOL-31137 iMachining || Channel parameters - incorrect value displayed
SOL-31132 Turning || Grooving || Udpated stock is not correct when cycle is used
SOL-31087 VMID || Small issue with option description
SOL-31086 GUI || After confirmation of level value with Enter key on Keyboard nothing is saved
SOL-31074 Balanced Rough || Slave tool is wrong oriented in Machine Preview
SOL-31072 SetupSheet | Wrong view of a fixture, if using more than one setups
SOL-31068 Pocket || GUI || If "Disabled Automatic Upper Level" combo box is Turn On > Levels "User defined" should be enabled
SOL-31058 Machine Simulation || Helical arcs that come from ARC_3D_5X are not correct in the Machine Simulation
SOL-31035 GUI || Portuguese GUI and translation are incorrect
SOL-31012 Pro 3D HSR || Incorrect toolpath preview in machine simulation
SOL-31010 Gcodesimulator || GPP with open / close Functions || Export NC Codes || NC File no access
SOL-30996 Machine Preview || Multi-Setup || Crash on running Mach Sim on 2nd Setup
SOL-30991 Japanese version || Ribbon || Please change it to "HSS" instead of "ハイス"
SOL-30987 Install||IVC||Hungarian GUI is wrong
SOL-30986 Install||IVC|| Hungarian cam settings GUI is wrong
SOL-30970 Update SolidCAM installers with CIMCO OEM Suite - version 2024.01.28
SOL-30960 CONTOUR 3D || Calculation problem after Cleanup CAM-Part
SOL-30943 Pro 3D HSR || Machine Simulation || Incorrect Arc movements
SOL-30924 Channel Sync || Operation added to a wrong place
SOL-30915 ToolKit || Feed and Speed in Probe and Broach
SOL-30914 ToolKit || ITAC || Union With Pattern
SOL-30891 Channel Synch || Wrong Axes Pattern selected
SOL-30859 MCO Cycle || Zmin/Zmax values become incorrect after changing the fixture
SOL-30856 ToolKit || Revolve Holders for Milling || Red circle is different in ToolKit and Machine Preview
SOL-30855 MCO || Cycles || All value fields are multiplied by 25.4 when opened Metric Part after Inch Part
SOL-30854 ToolKit || Tool Preview || Match CS of first tool component
SOL-30840 Update SolidCAM installers with CIMCO OEM Suite - version 2024.01.27
SOL-30830 ToolKit || ITAC || Changing Coordsys of an Part Mounting
SOL-30825 CAM-Tree || Incorrect ToolTip text
SOL-30818 Turning || Tool data || Spin Rate as V || Behaivor of "Stay in gear limits" when unchecked
SOL-30817 ToolKit || Updating component doesn't change anything
SOL-30816 Turning || Tool data || Spin Rate as V || Cannot define V value over the gear limits
SOL-30814 ToolKit || Reloading tools leads to tools disappearing from operations
SOL-30806 ToolKit || Settings || Removing "?" From Settings
SOL-30804 Channel Synchronization || Axes Patterns || Selection of Axes Pattern doesn't follow the ID
SOL-30803 MCO || Submachine movement stuck loading machine simulation
SOL-30801 Templates || iMachining ||Adding operation from a multi-tool template with one tool results in two operations
SOL-30793 3D Milling || Z-Entry Strategy || The preview pictures of the Helical and Linear Z-Entry strategy are replaced
SOL-30786 iMachining || Templates|| Templates for multitool imachining operation
SOL-30780 Channel Synchronization || Index 3 Channels || Impossible to synchronize selected items
SOL-30767 ToolKit || Refreshing a Toolitem in Favorites Causes a Crash
SOL-30763 Channel Synch || Incorrect showing of active axes in label
SOL-30753 iMachining || Error with feature detection chain
SOL-30752 Channel Synch || Clash in default Axes Pattern
SOL-30731 iMachining || SolidCAM crashes with a report because of a JobUser dialog
SOL-30722 Channel Synch || Clash with Workpiece loading
SOL-30689 CAM Manager || font size and color of split marks not taken form the settings anymore
SOL-30685 Machine Setup || Part Page || Fixture || Close on Target doesn't work
SOL-30669 MCO || Incorrect Machine Preview on SM movement with set spindle orientation
SOL-30666 Gcode || PCODE || One time we get a PROC and the other time we don't.
SOL-30662 Cimco Editor 2024 || General || Cimco start button || Behavior when Gcode editor is different
SOL-30659 MCO || Drive unit does not take into account second gear
SOL-30657 Part Simulation || Solidcam crashes
SOL-30647 Channel Synchronization || Citizen M32-5M8 || Axes are not shared well Fixed
SOL-30644 SC || Hungarian Version || GUI || Need translation
SOL-30643 SC2024 SP2 || VMC/VMID || Not Responding when applying data to other configurations
SOL-30639 3D iMachining || message : Operation is not saved, showing up when the operation is not changed
SOL-30634 Templates || iMachining Multitool template has incorrect tool data
SOL-30630 GUI || Czech Version || Fields & Texts need to be moved and translated
SOL-30621 Toolkit || Disabling Solidcam ToolBar When Toolkit is Active
SOL-30612 iMachining || FR by faces || Investigate extra precision in depth of imachining operation
SOL-30608 Operation sequence manager || Clash in sub pattern on 3 channel machine
SOL-30603 2.5D Milling || T-Slot || Wrong direction of tool movement with Bottom to top option
SOL-30487 Not updated setup caused no kinematic solution
SOL-30479 GUI || Russian Version || Need Translation & Fields to be moved
SOL-30473 ToolKit || Toolkit Settings Exit Without Save
SOL-30470 ToolKit || ITAC || Incorrect Import of Components
SOL-30449 Pocket || Operation is gouging through lugs in part when finish with cutter comp is enabled
SOL-30438 ToolKit - Get assert message from function CToolComponent::SeparateJointName(…)
SOL-30419 Drilling || Deep hole drilling output faulty
SOL-30409 Thread Milling || Carmex || Shoulder length (SL) is lower than Thread cutting (CL)
SOL-30397 iMachining || GUI || Add "select all/deselect all" checkbox for ease of use
SOL-30387 5x Turbo || Vertical champfers radius 2mm will not be milled in 2024
SOL-30380 MCO || Wrong movement in MCO Cycle
SOL-30349 ToolKit || Convex Tip || Support in ToolKit Settings || Tool Path Color
SOL-30337 ToolKit || ITAC || Wrong Position After Changing CoordSys
SOL-30328 Pro 3D HSM || Constraint boundaries || Selected surfaces || Ability to reverse the chain direction
SOL-30284 Pro 3D HSR || Ramping angle same color like tool path
SOL-30158 Turning || Drive unit || Operations are not calculated when reopen part
SOL-30124 3+2 roughing || changing tilting strategy -> SC crash
SOL-30118 Operation Sequence Manager || Can't delete sync label
SOL-30073 Cimco editor 2024 || MCFG files || Exported MCFG file cannot be read by Cimco 2024
SOL-30069 Machine Simulation || Incorrect submachine movement
SOL-30032 GUI || Flickering - overlap of icons
SOL-29975 Multi-axis Drilling || Wrong rotary axis position at X,Y 0 drill position
SOL-29890 Chamfer || Standard template with cutting diameter
SOL-29799 Synchronization || Change model reference || Error for geometry synchronize || Calculation error
SOL-29768 GUI || Portuguese Version || Need translation & Move checkbox
SOL-29554 Turning || Tool data || Spin rate || Operation fails to calculate in SC2023
SOL-29439 2D Pocket || helical ramping by point || position of helix not correct anymore
SOL-29403 Machine Simulation || Part jumps on Axis sync off action
SOL-29341 Cimco Editor 2024 || Install || Give a user possibility to unselect Solidshop module in install
SOL-29306 2.5D || Pocket || iMachining || Open Edges offsett updates slow
SOL-29264 Machine Simulation || Balanced rough || Axes Unit Share || Wrong tool position in Superimposition mode
SOL-28450 MCO || Incorrect Sub-machine movement with B axis Tsugami machine
SOL-28418 Machine simulation || Clamping device is displayed incorrectly
SOL-28324 Machine Simulation || Rearranging Sub-machine actions in MCO and recalculating only MCO will give wrong previous values for SM action
SOL-28101 2.5D || expert intelligence(EI)|| Preview of 3D imachining operation does not show the word "Levels"
SOL-28054 Simulator || Collision detection || Reporting non-existing collisions
SOL-27967 Toolpath color is changing after change of tool parameter
SOL-27472 Multiaxis || Display MW "Physical limitations" message in SolidCAM
SOL-25500 Machine Simulation || MCO Submachine Movement || Show last axes values in Move list when we simulate Submachine Movement
SOL-16715 Toolkit || Import tool structure - incorrect export of step to stl files
SOL-482 Machine Simulation || BS turning face operation is missing in machine simulation
SOL-11323 Multi-channel and Multi Setup in case of Machine Simulation
SOL-1862 Machsim || Machsim run only for first setup
SOL-31818 Channel Synch || Incorrect table information in tooltip
SOL-31554 Milling || Mounting coordinate system select problem