NI SystemLink 2022 Q1 Patch2
NI SystemLink 2022 Q1 Patch2 | 3.9 Gb
Languages Supported: English, Deutsch, 日本語, Simplified 中文
Languages Supported: English, Deutsch, 日本語, Simplified 中文
National Instruments, the provider of a software-defined platform that helps accelerate the development and performance of automated test and automated measurement systems, announced the new version of SystemLink software.
1939802 Steps may incorrectly be marked as failed or timed out when using Store and Forward
Stored requests that do not have a unique timestamp can be incorrectly sorted and forwarded out of order. Depending on the order, different symptoms can occur:
- If the Main sequence step occurs before the create result step, the step and all of its children fail to be created
- If the Update step occurs before the create step, the update step will fail and the step will remain in the running stage and will eventually timeout
Workaround: There is currently no known workaround for this issue.
1958992 Store and Forward Service may crash when there are too many items in quarantine
Batch forwarding, a new feature added in the 21.5.1 SystemLink Client reads the entire store directory into memory before forwarding. When the store directory is too large, this results in significant memory consumption, which can crash the service or result in undesirable side effects.
Workaround: There is currently no known workaround for this issue.
1939771, 1944740 Reports may not be attached to Test Results when using Store and Forward in the TestStand TestMonitorClient
XML, PDF, System Software, and Asset Reports may not be properly attached to the test result when store and forward is being used. This is caused by a race condition that may mark the result update as complete before the reports have been attached, or if the System does not currently have a connection to the SystemLink Server.
Workaround: There is currently no known workaround for this issue.
1955444 Store and Forward files may not be removed from disk after forwarding is complete
If multiple store and forward files have CloseFile updates with the same timestamp, only one will be removed from disk. This may result in extra files remaining on disk unnecessarily.
Workaround: There is currently no known workaround for this issue.
1953405 Steps and Results created by TestStand when Store and Forward is enabled may have an incorrect 'Started At' time
Steps and Results that are created by TestStand when Store and Forward is enabled will have a 'Started At' time that reflects when they are created on the server rather than when the test ran.
Workaround: There is currently no known workaround for this issue.
1939944 Unhandled Exception in the TestMonitor plugin may cause the Store and Forward service to crash
If an unhandled exception occurs in the TestMonitor plugin for TestStand when Store and Forward is enabled, the backing service may crash when forwarding quarantined Step or Result data.
Workaround:There is currently no known workaround for this issue.
1947039 Unstable network connection may cause Store and Forward to skip requests
If forwarding is interrupted due to poor network connectivity, items with the same timestamp may be skipped when forwarding is resumed.
Workaround: There is currently no known workaround for this issue.
1986882Memory leak in Test Monitor Client
The Test Monitor Client has a small memory leak, the severity of which varies based on the number of steps run and the amount of data stored.
Workaround: Restart TestStand to clear the leaked memory.
Stored requests that do not have a unique timestamp can be incorrectly sorted and forwarded out of order. Depending on the order, different symptoms can occur:
- If the Main sequence step occurs before the create result step, the step and all of its children fail to be created
- If the Update step occurs before the create step, the update step will fail and the step will remain in the running stage and will eventually timeout
Workaround: There is currently no known workaround for this issue.
1958992 Store and Forward Service may crash when there are too many items in quarantine
Batch forwarding, a new feature added in the 21.5.1 SystemLink Client reads the entire store directory into memory before forwarding. When the store directory is too large, this results in significant memory consumption, which can crash the service or result in undesirable side effects.
Workaround: There is currently no known workaround for this issue.
1939771, 1944740 Reports may not be attached to Test Results when using Store and Forward in the TestStand TestMonitorClient
XML, PDF, System Software, and Asset Reports may not be properly attached to the test result when store and forward is being used. This is caused by a race condition that may mark the result update as complete before the reports have been attached, or if the System does not currently have a connection to the SystemLink Server.
Workaround: There is currently no known workaround for this issue.
1955444 Store and Forward files may not be removed from disk after forwarding is complete
If multiple store and forward files have CloseFile updates with the same timestamp, only one will be removed from disk. This may result in extra files remaining on disk unnecessarily.
Workaround: There is currently no known workaround for this issue.
1953405 Steps and Results created by TestStand when Store and Forward is enabled may have an incorrect 'Started At' time
Steps and Results that are created by TestStand when Store and Forward is enabled will have a 'Started At' time that reflects when they are created on the server rather than when the test ran.
Workaround: There is currently no known workaround for this issue.
1939944 Unhandled Exception in the TestMonitor plugin may cause the Store and Forward service to crash
If an unhandled exception occurs in the TestMonitor plugin for TestStand when Store and Forward is enabled, the backing service may crash when forwarding quarantined Step or Result data.
Workaround:There is currently no known workaround for this issue.
1947039 Unstable network connection may cause Store and Forward to skip requests
If forwarding is interrupted due to poor network connectivity, items with the same timestamp may be skipped when forwarding is resumed.
Workaround: There is currently no known workaround for this issue.
1986882Memory leak in Test Monitor Client
The Test Monitor Client has a small memory leak, the severity of which varies based on the number of steps run and the amount of data stored.
Workaround: Restart TestStand to clear the leaked memory.
SystemLink software is an intelligent systems and data management software framework for validation, production, and monitoring test environments. Designed for engineering use cases, SystemLink software combines test-and-measurement-focused applications and data services with a software infrastructure that utilizes market-leading open-source technologies. This combination of IP and open technologies means that SystemLink software can provide a unique blend of domain value, extensibility, and flexibility.
SystemLink software is comprised of four modules—Software Configuration, Asset, Test, and TDM DataFinder. These modules provide application-specific capabilities that use the SystemLink Server for data communication, transmission, and movement, as well as software package, alarm and notification, and NI and non-NI instrument dashboard management. SystemLink provides TestStand and DIAdem native hooks for test automation and measurement data analysis, respectively.
With its open and extensible architecture, you can use SystemLink software with NI and non-NI automation software development tools such as LabVIEW, MathWorks, Microsoft .NET framework, and Python.
SystemLink software eliminates the manual tasks associated with keeping test systems current and healthy. From automating updates to monitoring system health, SystemLink software delivers key information that improves situational awareness and test readiness across the product life cycle, and also rest assured that your software configurations are accurate, and that test equipment complies with calibration and quality standards.
By employing an automation and connectivity framework, SystemLink software bridges the divide between your Operational Technology (OT) and Information Technology (IT) systems by aggregating test and measurement data from all test systems into a centralized data repository. Easily transfer data from testers to data stores via tags or files, accessible securely through the SystemLink web application.
At NI, we bring together the people, ideas and technology so forward thinkers and creative problem solvers can take on humanity’s biggest challenges. From data and automation to research and validation, we provide the tailored, software-connected systems engineers and enterprises need to Engineer Ambitiously every day.
Product: NI SystemLink
Version: 2022 Q1 Patch2 (21.5.2.49178)
Supported Architectures: x86 or x64
Website Home Page : www.ni.com
Languages Supported: multilanguage
System Requirements: Windows *
Size: 3.9 Gb
NI SystemLink 2022 Q1 Patch2
Please visit my blog
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
![NI SystemLink 2022 Q1 Patch2]()
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
NI SystemLink 2022 Q1 Patch2
