DownStream Products 2024 (2145)

73268 Nelist Compare – Enh to support name entry using common expressions
73263 IPC-2581 import connects wrong pin geometry to component pin
73258 Export of odb++ incorrectly rotates many surface mounts 90 degrees
73257 Merged data incorrectly filled solid when using OpenGL
73255 ODB++ Export: pads are rotated incorrectly
73252 ODB++ import reports unnecessary errors for Altium files
73250 Paste Layer – Unable to copy and paste layer after DXF import of this file
73249 Reports issue: Drill and Dcode totals not shown in Reports dialog
73236 Compensation dialog truncated
73228 Corrected Options Label Errors for New Placement Boundary
73224 Design Compare - Label cleanup
73223 Licensing Option Enh to show licensing information when CAM350 running
73213 Draw to Border not working on this design
73208 Macros – This 12.2 customer macro fails in 15.0
73180 CAM350 Gerber import incorrect for large arc
73176 Min Gap Issue when running legacy macros in 15.0
73172 DXF Import Dcode mapping is not correct when Finish button is selected instead of Next Button
73159 ODB++ Export board images are missing for panel for example with venting
73155 Issue Exporting ODB++ from the Panel Editor with this design
73142 For example ribbon command sequence, CAM350 will not exit.
73101 Long text blocks are truncated on saving CAM file
73100 Quick Access tool bar changes not saved
73099 Chamfered rectangles are rotated incorrectly in the CAM editor
73081 Maximum length of pin names needs to be increased
73080 During the Measure command, the zoom hot keys (+/-) do not work.
73065 IPC-2581 import for Siemens Xpedition example is incorrect
73031 odb++ and ipc-2581 data exported from CAM350, fails to load properly in BP
73025 Redraw does not occur correctly for the sample macro: autodim.vbs
73007 Report files from the Error Explorer have extra incorrect text
72998 CAM350 Home Ribbon customization does not retain the group and tool name
72983 Stencil Designer- Running automatic mode after interactive produces bad results when using reference layer
72969 When creating an MCM layer set, you cannot select insulator layers
72967 Gerber files do not open when you double click in the File Explorer DownStream Technologies, LLC Copyright © 2006-2025 13 of 16
72844 Panning using the mouse wheel ignores view rotation in the CAM editor
72842 Draw to Flash command launched from Stencil Designer does not work correctly
72777 ODB++ import - add Support for tool attribute : TYPE2=LASER
72772 “VB Automation Samples” folder missing in the CAM350 installation folder
72762 For sample mill circle, incorrect path is created when changing circle type from inside to outside type
72754 Import *.camsettings file does not import the Unit settings
72745 For sample polygon, arcs are sectorized in polygon after copy command.
72734 Automation API access is not available for all object properties
72708 For Gerber export from Panel editor, rounded rectangle apertures are incorrectly exported for sample design.
72671 Enhancement – Netlist compare should optionally ignore External net pins that are in the NO CONNECT net and have a pad size of zero
72663 For sample design, IPC-2581 import is creating octagon Dcodes that are too large
72637 Enhancement – when reporting “No Errors” for a DFM check; the Error Explorer should also include a brief description of the DFM check parameters.
72610 ODB++ import hangs for sample design
72511 Enhancement – new check is requested to insure that there is no drill smaller than target size
72509 IPC-2581 import results in incorrect traces for sample design
72264 Mouse wheel moving is the opposite direction when compared Blueprint
72220 The Measure tool displays in inches when CAM350 display units are in mils
72154 Netlist Compare produces false errors for sample design
72051 Previews do not work for rounded and chamfered rectangles in Aperture Editor.
72044 Part to Part DFA checking should use layers with intelligent data for placement boundaries associated with components in IPC-2581 files and ODB++ files.
72035 Crash on legacy Basic macro playback
71923 Legacy command Keep Copy of Last Saved file is not implemented
71774 Draw to flash fails to convert small rounded polygons for sample design
71349 Colors for part outline and fill are dropped on loading CAM350 14.1 *.CAM files.
71053 Undefined apertures incorrectly displayed with width in HW acceleration mode
70846 When Tool Reference is not equal to the Tool Number, the selection filter does not work when filtering NC data by Tool Reference
70632 For panel editor, venting pattern for sample design hangs over edge
70604 Mill export creates self intersecting arcs
70591 Barco import drops apertures for sample design file
70581 ODB++ import ignores .pad_usage attribute for global and local fiducials.
70014 After IPC-2581 export and import, board data mirrors and rotates when moving the Space Origin
69711 DXF import fails for sample DXF 2018 file
69190 Enhancement – File Merge layer mapping dialog should all “All New Layer” option
69081 Enhancement – Drill spacing checks should include drill to border checks.
68820 IPC-2581 fails for sample design.
68487 ODB++ import creates cam350 objects with undefined apertures
68462 Enhancement - Drill and Mill tab should support arrow key cell navigation
67780 Enhancement - Auto-import Template – when adding new layers, the layer color should default to the first unused color
67772 Enhancement – Add a new option to display layers in stackup order
67714 After net names are changed, you cannot sort the Net table by net name.
67622 Missing Functionality- check drill and check mill missing checks be available for the Advance NC Editor
67523 DXF Mirrored text is not mirrored on import into CAM350
67509 External Nets Dialog has display issues with icons and colored text
67493 Error Explorer Terminology - CPD should refer to Component Pin Pads
67491 Non-black background color should not affect transparency display
66733 Pads are lost on ODB++ import. Champhered rectangles with too large arcs are not handled.
66635 Status bar color in all analysis dialogs should contrast with the error text color when running DFM analysis.
65109 Endpoints found to be midpoints in FPE
64719 Tools ribbon Reports dialog tabs are not visible for high resolution display with Dark Gray style
64163 DXF import - Japanese Simsun font characters are incorrect
63898 File Merge error occurs for sample design data. Data is duplicated.
63881 Legacy Basic macro playback creates incorrect results
63591 Drill and Mill tab is updated after importing drill or mill files.
63000 Reports command fails for sample design
62761 Cleanse Data fails when using select area
62651 Gerber import error
62112 Slot error message is not relevant for ODB++ import
61404 Slow startup up for license remote client
60585 Failure on PADS Export for this CAM file
60582 DXF export for CAM350 70 bundle needs export feature

73308 This BP 6.6 DPD file opened in BP 7.0 does not display ref des for 2 components
73261 User defined component attribute “ITEMNO” cannot be sorted numerically
73245 AutoSave issue causes File Save command to work like File Save As
73234 DXF import enhancement to support UTF-8 format
73218 Automation API for the Square End mill tabs and route segment/arc
73217 Panel - Mill Tab Manager - Add Square End options to add from gallery
73209 Diameter and Radius Dimension - drag and drop usability
73205 Panel - Square Mill Tab previews incorrectly shows ROUND mill tabs
73204 Setting a variant does not work using the BluePrint-PCB API
73201 Dimensions in Rigid-Flex Stackup in 7.0 DPD file are not translated correctly to the Dimensions tab of the 7.1 Format Rigid Flex Stackup dialog
73189 Merge Web Routes Incorrect with Square Mill Tabs on Arcs
73185 Import parts list with variants does not import new attributes
73174 Exported PDF has wrong PCB visibility settings (layer profile on)
73173 Graphics OpenGL issue where profile for this design is displayed incorrectly
73170 BluePrint-PCB is not able to snap to mounting hole components in this design
73162 Repeatable crash for command sequence with coordinate dimensioning
73144 Magnify View should have same "exclude drawing elements" selection like Explode View.
73108 API Update PCBViewFilterDecal element - new properties - PadsVisible, OutlineVisible, RefDesVisible
73103 New Copy and Apply Part Formatting commands to Comp ribbon
73098 Single char hot key assignment does not support entry into text strings.
73075 Cannot dimension all elements of a fiducial
73049 API update ImportedFileShape object – LockSize property
73035 Copy and paste fails for image copied from a PowerPoint PPTX file and pasted into BluePrint-PCB
73020 SUV disabled when -Diasable3D option used
73016 API update for Detail Object property: Description
73003 Callout links do not work in adaptive templates when in sheet Edit mode
73002 Ribbon control for BOARD OUTLINE WIDTH flickers as you mouse across ribbon
73001 Group selecting multiple ref des that have different font sizes or different font types causes error messages to appear
72990 When a drill set size is changed on ECO Import, and individual drills are visible in PCB view, BluePrint-PCB will turn on the all the drills that changed size.
72986 Cadence Allegro Interface - Cannot Start BluePrint-PCB with OrCAD 110OP license
72848 Support for dimensioning multiple stackups in the Rigid Flex Stackup template.
72835 BluePrint Viewer - Start Page Does Not Display RSS feeds
72806 When merging a DPD file, all reference designators are reset to default locations.
72792 File Export PDF incorrectly outputs Japanese characters.
72790 Process Step Charts get updated on CAD design re-import even if unselected in Auto-update Templates
72767 API Update: BluePrint-PCB Sheet Object - MOVEUP() and MOVEDOWN() and a new command INSERT()
72741 API Methods needed for Parts List Manager for Part Type definition
72732 Resizing / Dimensioning does not work on POLYLINE shapes.
71791 Automation API support for Stackup Visualizer and Rigid Flex Data.
71839 Issue where Drill chart does not execute properly
71838 Custom drill attributes become cleared out simply by opening the Fabrication Manager and selecting "OK" to close.
71630 When adding a note, the active font should be set based on the previous note or parent note block.
71418 Gerber file loads incorrectly into BluePrint-PCB
70664 PCB with components overhanging board outline will cause side view to shift on PDF Export.
70522 Range of Reference Designators should always be more than 2 reference designators.
70323 If components in a PCB View have some pins numbers turned on, regeneration of reference designators causes all pin numbers for those components to turn on.
70228 Enhancement to put user defined doc variable in alpha-numeric order
69962 Allow the user to specify the distance between the drills in the executed via stackup
69710 On design re-import (ECO), 3D views on drawing sheets are reset to the default scale and camera settings.
69613 For assembly variants in PCB Views, when uninstalled and substituted parts are disabled (not shown) in the PCB View, both PDF and DXF export incorrectly shows the uninstalled and substituted parts
68920 For IPC-2581 CAD design, Export PDF incorrectly displays pins when top assembly view and bottom assembly view.
68140 Adaptive Drill Chart option does not work for this example. Edit Adaptive Template shows incorrect data and Execute crashes.
67538 Example DXF Files will not import into BluePrint-PCB.
67533 BluePrint-PCB crashes when trying to access sheet #2 of the Fabrication Drawing set for example design.
66823 ODB++ import crashes when reading optional Allegro ASCII *.out files.
66822 Callout linking enhancements and fixes
66645 ODB++ import for Altium design creates incorrect pin numbers.
66117 PDF Export shows lines where there are no lines displayed in BluePrint-PCB
63329 Polarity markings are incorrect on PDF Export for sample design